Lathes

BOEHRINGER VDF DUE 560 CNC LATHE

(Reference no.: 101290)

Distance between centres: 2500 mm, Spindle bore: 52 mm, 3-jaw chuck: 280 mm.........

This item is located in Belgium

Price: PRICE ON REQUEST

HAAS CL-1 CNC CHUCKING LATHE (SMALL FOOTPRINT)

(Reference no.: 101293)

Year: 2020, Control: Haas, Swing diameter over the cross slide: 279 mm, Swing diameter over the table: 126 mm, Maximum cutting diameter: 126 mm, Bar capacity: 25 mm, X-Axis travel: 305 mm, Z-Axis travel: 203 mm, Spindle nose: 5C Collet type, Maximum spindle speed: 6000 rpm,........

This item is located in the United Kingdom

Price: 31,000.00 GBP (OFFERS CONSIDERED)

MAZAK SUPER QUICK TURN 10 (SQT-10) CNC LATHE

(Reference no.: 101333)

Year: 1993 abt, Serial number: 110161, Control: Mazatrol T32B, Maximum bar capacity: 42 mm diameter, Maximum turning diameter: 340 mm, Maximum turning length: 650 mm, Spindle speed: 6000 rpm, Spindle bore: 52 mm, Collet chuck, Turret: 12 station, Tool eye, Tailstock, Chip conveyor, Sameca Multisam........

This item is located in the United Kingdom

Price: 5,000.00 GBP

MORI SEIKI NLX 2500MC/1250 CNC LATHE / TURNING CENTRE

(Reference no.: 101266)

Year: 2013-07, Control: Mitsubishi M730BM with Mapps IV, X-Axis travel: 260 mm, Z-Axis travel: 1345 mm, C-Axis: 0.001 degrees, Maximum bar diameter, Maximum cutting diameter: 356 mm, Maximum turning length: 1255 mm, Spindle speed: 4000 rpm, 12 station turret, Tool drive power........

This item is located in Germany

Price: 57,000.00 EUR

MORI SEIKI TL 40 / 2000 CNC LATHE

(Reference no.: 100886)

Year: 1988, Serial number: 1790, Swing over Bed: 620mm, Swing over Cross Slide: 380mm, Distance Between centres: 2100mm, Spindle bore: 77mm, RPM: 25 - 2,500 rpm, Tailstock diameter: 150mm, Turret: 8 station, Hydraulic Steady: SMW, Controler: FANUC FAPT TURN 10T, Chip conveyor, FANUC Red Cap m........

This item is located in Ireland

Price: 19,500 EUR LOADED TO TRUCK

SAFOP LEONARD 70/2500 CNC LATHE (2500MM X 10000MM WITH C AXIS)

(Reference no.: 101195)

Year: 2004, Control: Siemens 840D, C-axis headstock with 1500mm diameter chuck, Ejector type drilling system, Milling unit, Angular head, Hydrostatic steadies, Tooling, Full documentation. The machine is in excellent condition, comparable only with new.........

This item is located in the United Kingdom

Price: 615,000.00 GBP LOADED TO TRUCK

SCHAUBLIN 102N CNC LATHES (4 OFF AVAILABLE)

(Reference no.: 101348)

All machine are similar. Excellent condition ........

This item is located in Switzerland

Price: 8,000.00 CHF EACH

SPINNER TM 7 AXIS CNC TURNING CENTRE

(Reference no.: 100767)

Year: 2001, Serial number: 090119, Control: SIEMENS, 41mm bar capacity, 2 x C-Axis, B-Axis, Y-Axis, 3x 8 position turrets, all driven positions. with short LNS Bar loader. Many live tools. Machine is in excellent order, little used - prototype/laboratory work only. approximately 4000 hours only.........

This item is located in Switzerland

Price: 55,000.00 CHF

TORNOS ENC 164 CNC SLIDING HEAD LATHE

(Reference no.: 101189)

Serial number: T58931, Control: FANUC O-TT, Subspindle and indexing, Magazine bar loader    ........

This item is located in Switzerland

Price: 4,500.00 EUR

TORNOS ENC 74 CNC SLIDING HEAD LATHE

(Reference no.: 101190)

Control: FANUC O-TT, Spindle capacity: 7mm, Subspindle and indexing, Magazine bar loader.  ........

This item is located in Switzerland

Price: 4,000.00 EUR

TORNOS SIGMA 8S CNC SLIDING HEAD LATHE

(Reference no.: 100984)

Year: 2007, Control: Fanuc 321 model i, Tryton LNS 112 magazine bar loader........

This item is located in the Czech Republic

Price: PRICE ON REQUEST

TORNOS SIGMA 8SP CNC SLIDING HEAD LATHE

(Reference no.: 100985)

Year: 2006, Tryton LNS 112 magazine bar loader........

This item is located in the Czech Republic

Price: PRICE ON REQUEST

MSA V500 FLEX SINGLE SPINDLE PLC VERTICAL TURNING LATHE (EX DEMONSTRATION)

(Reference no.: 100090)

Control: Vertical Allen Bradley PLC Controls, Slide Configuration: Platen (Side slide available), Tool Positions (Platen): Flexible, depending on tool size, Number of Axis: 2, Max. Swing: 500mm, Max. Turn Diameter: 400mm, Max. Turn Length: 200mm, Spindle Speed R........

This item is located in the United Kingdom

Price: 5,500.00 GBP (OFFERS CONSIDERED)

TITAN SC 22 H CNC VERTICAL LATHE (2.2M X 1.8M)

(Reference no.: 101312)

Swing: 2200 mm, Face plate diameter: 2000 mm, Working height: 1800 mm, Table capacity: 15000 kg, Machine weight: 30000 kg, Machine Dimensions: 4600 x 4300 x 4500 mm, **The old CNC will need replacing........

This item is located in Romania

Price: 44,000.00 EUR

COLCHESTER TRIUMPH 2000 GAP BED CENTRE LATHE (15" X 50" CAPACITY)

(Reference no.: 101297)

Swing over the bed: 15" diameter, Swing in gap: 23" diameter, Distance between the centres: 50", Spindle bore: 2-3/16" diameter, Spindle speeds: 16 speeds 25 - 2000 rpm, Quick change tool post, Tailstock, Chuck guard, 3 & 4 Jaw Chuck, Coolant Weight: 1280kg, ........

This item is located in Northern Ireland

Price: 9,000.00 GBP

DUGARD T8 HYBRID 8-AXIS MILLTURN CNC LATHE

(Reference no.: 101334)

Year: 2014, Control: Mitsubishi M700 Control Main spindle: X Z C, Sub Spindle: X Y Z C B, Very good condition, Can be seen under power........

This item is located in the United Kingdom

Price: 45,000.00 GBP

NARDINI MS 175E CENTRE LATHE

(Reference no.: 101244)

Distance between centres: 800mm, Swing over the bed: 200mm, Slide cross stroke: 225mm, Spindle speeds: 31.5 - 2500 rpm (18 ranges)........

This item is located in Switzerland

Price: 4,000.00 EUR

SCHAUBLIN 70 HIGH PRECISION TOOLROOM LATHE

(Reference no.: 101235)

Very well equiped with turret and tooling........

This item is located in Switzerland

Price: 4,250.00 CHF

SCHAUBLIN TO-102 PRECISION TOOL MAKERS LATHE

(Reference no.: 101050)

Year: Fully revised in July 2016, Serial number: 147 129, Swing over the bed: 200mm diameter, Distance between centres: 300mm, Screw operated carriage with tool post, Tail stock, fully revised and upgraded in July 2016 by swissmachines.ch........

This item is located in Switzerland

Price: SELLER SEEKING OFFERS

GILDEMEISTER GS28-8 MULTI SPINDLE AUTOMATIC LATHE

(Reference no.: 101081)

Year: 1984, Serial number: 70144, Threading, Pickup, Possible Polygon attachment, 6 x high speed drilling attachments Standard stock reel and stand. Good quantity of tooling.........

This item is located in the United Kingdom

Price: 7,500.00 GBP

PACKAGE OF 3 WICKMAN 1" X 6 AUTO LATHES - LOT OF SPARES AND TOOLING - SWARF MANAGEMENT SYSTEM

(Reference no.: 101168)

Package comprises: 1 off Wickman 1" x 6 Spindle Automatic Lathe (16442) Year: 1977, Electro-Magnetic clutch, Pick up & back burr attachment, Threading attachment, Enclosed guarding, Stock carriage & Stand, Swarf conveyor, Fume extractor. 1 off Wickman 1" x........

This item is located in the United Kingdom

Price: 75,000.00 GBP (OFFERS CONSIDERED)

SCHUTTE SF42 MULTI SPINDLE AUTOMATIC LATHE

(Reference no.: 100484)

Year: 1977, Serial number: Serie 20 nr. 15, Original Schutte pick up attachment, Standard drilling attachments, Standard slides, Chip conveyor, Pietro Cucchi magazine bar loader type PB48, age 1998, to accommodate 4 metre (12') bar lengths.........

This item is located in the United Kingdom

Price: 8,750.00 GBP

HANKOOK PROTEC 9NB CNC OIL COUNTRY LATHE

(Reference no.: 101075)

Year: 2001, Spindle bore: 175mm (7”), Swing over the bed: 950mm, Maximum turning diameter: 950mm, Maximum turning length: 3000 mm, Spindle speed: 3 - 800 rpm, Front and rear 4 jaw,175mm bore chucks. NB: The machine's drives are not working and will need replacing.........

This item is located in Singapore

Price: PRICE ON REQUEST

BSA 48 SINGLE SPINDLE AUTOMATIC LATHE (SHORT STROKE)

(Reference no.: 101252)

Year: 1970, Serial number: 48-1070-2326-26, 1/2" (12.2mm) Capacity, 6 Station Turret, 2 Cross Slides, 3rd Slide, 200 - 6000rpm, Stock Tube & Stand, Floor Space Required: 165" x 28" Net Weight: 860kgs Machine is located in Worcestershire area.........

This item is located in the United Kingdom

Price: 500.00 GBP

TORNOS M7 SLIDING HEAD AUTOMATIC LATHES (5 OFF MACHINES, WITHOUT ATTACHMENTS)

(Reference no.: 101069)

Further details can be obtained if required.........

This item is located in Switzerland

Price: 12,500.00 CHF PACKAGE PRICE

TORNOS R10 SLIDING HEAD CAM AUTO LATHES (2 OFF)

(Reference no.: 101071)

No specs or further information. Please see photos........

This item is located in Switzerland

Price: 4,000.00 CHF PAIR

BERTHIEZ TDM 630 CNC VERTICAL TURNING LATHE (9.7M X 4.9M CAPACITY)

(Reference no.: 101315)

Year: 2010 Rebuilt, Controller: Siemens Sinumerik 840D Condition - reconditioned (used) Double Column vertical turning lathe with C axis and milling Main technical data: Maximum turning diamteer: 9700 mm, Maximum turning height: 4900 mm, Face plate diameter: 6300 mm, Maximum weight ........

This item is located in Europe

Price: 405,000.00 EUR

BERTHIEZ TDM 630/315 VERTICAL BORER LATHE (9700MM X 4900MM)

(Reference no.: 101313)

Year: 1979, Serial number: 154004, Maximum turning diameter: 9700 mm, Maximum turning height: 4900 mm, Face plate diameter: 6300 mm, Maximum piece weight: 160 tons, Speed range of face plate: 0.4 - 50 rpm, Main engine power: 71 kw, Ram size: 360 x 360 mm,........

This item is located in Romania

Price: 375,000.00 EUR

TITAN SC 22 VERTICAL LATHE (2.2M X 1.5M)

(Reference no.: 101311)

Swing: 2200 mm, Face plate diameter: 2000 mm, Working height: 1500 mm, Table capacity: 12000 kg, Machine weight: 32000 kg, Machine Dimensions: 4600 x 4300 x 4200 mm ........

This item is located in Romania

Price: 33,000.00 EUR